WipAir 3000 - Base station 120 Mbps Detached con Sincronizzazione
Descrizione Estesa
WipAir 3000 PTMP: Permette la creazione di infrastrutture punto-multipunto con throughput fino a 120 Mbps e con 1 ms di latenza tipica. Particolarmente indicato per applicazioni di videosorveglianza o per backhauling tra più punti con singolo punto di raccolta e quindi con una singola frequenza occupata.
Dettagli Aggiuntivi
RADIO
Radio Frequency: 5.470-5.725 GHz
Net Throughput: Up to 120 Mbps (60 Mbps Full Duplex)
PPS: 50,000 Packets Per Second
Range: Up to 130 Km
Channel Size: Configurable – 5 / 10 / 20 / 40 MHz
Waveform: Advanced OFDM
Output Power: Configurable up to 26 dBm, 40 dB dynamic range
Handling interference:
- AIS – Automatic Interference Sensibility
- ACM – Adaptive Coding & Modulation
- ACS – Automatic Channel Selection
- FEC – Forward Error Correction, k = 1/2, 2/3, 3/4, 5/6
- Fast ARQ – Automatic Retransmit reQuest
Encryption & Security: 128-bit AES & MAC level authentication
Modulation: BPSK QPSK 16QAM 64QAM
NETWORKING AND MANAGEMENT
Topology: Point-to-Multipoint (PTMP)
Topology: Point-to-Multipoint (PTMP)
Access Technology: Time Division Duplex (TDD) – Dynamic or Symmetric
Data Latency: 1ms typical
Traffic Handling: Layer 2 transparent bridging
VLAN: Transparent or tagging/stripping
QoS: Based on 802.1q & 802.1p
Management: WEB, EMS, Telnet, Built in throughput tests and RF Analyzer tools
Data Latency: 1ms typical
Traffic Handling: Layer 2 transparent bridging
VLAN: Transparent or tagging/stripping
QoS: Based on 802.1q & 802.1p
Management: WEB, EMS, Telnet, Built in throughput tests and RF Analyzer tools
PHYSICAL AND ENVIRONMENTAL
Physical Interface: 2 X 10/100 Base-T (ODU)
Connector Type: RJ – 45
Mechanical: 19 x 19 x 4 cm (external Mechanical antenna port)
PoE Adapter:
- Input Power: 100-240 VAC, 47-63 Hz
- Mechanical: 10 x 5 x 2.5 cm
Mounting: Wall or Pole
Power consumprion: <6W
Operating temperature: -30°c ot 55°c
Operating Humidity: 95% non condensing
Power: Power over Ethernet
Physical Interface: 2 X 10/100 Base-T (ODU)
Connector Type: RJ – 45
Mechanical: 19 x 19 x 4 cm (external Mechanical antenna port)
PoE Adapter:
- Input Power: 100-240 VAC, 47-63 Hz
- Mechanical: 10 x 5 x 2.5 cm
Mounting: Wall or Pole
Power consumprion: <6W
Operating temperature: -30°c ot 55°c
Operating Humidity: 95% non condensing
Power: Power over Ethernet
